LED Low Glare Surface Linears
Our popular surface linear keeps glare low (UGR<19), light quality high, and installation refreshingly simple – exactly what busy contractors appreciate.
Switchable colour temperature means your customer always has the right tone on hand, whether the job calls for clean cool white or something a bit warmer. And with selectable 40W or 50W power, you can dial in the brightness to match the space without stocking multiple SKUs.
The slim housing sits nearly on ceilings, giving offices, corridors, classrooms and commercial spaces a crisp, uniform look. Reliable drivers, consistent output, and sturdy build quality make it a dependable option you can spec again and again.
Key Features
- Choose between 40W or 50W at install
- Selectable 3000K, 4000K or 5700K colour temperature
- Low glare UGR<19 prismatic diffuser
- Rear or end cable entry
- Hinged diffuser for quick and easy access to wiring
- Push connector for easy installation
5300lm/6100lm
output
3000K/4000K/5700K
colour temperature
UGR<19
rated diffuser
Optional Accessories
Hinged diffuser
A small feature that makes a big difference. The diffuser stays attached while your contractor wires, so there’s no juggling parts on a ladder.
Quicker access, cleaner installs, and fewer bits to keep track of – exactly what contractors need on a busy job.
Rear or end cable entry
More ways to wire means fewer headaches on install day. Rear or end cable entry gives your contractor flexibility to match whatever cable route they’re faced with – perfect for refurbs where nothing is quite where you expect it.
What we get asked
What is a low glare surface linear?
A surface linear is a slim, elongated LED light fitting that mounts directly onto a flat ceiling – no cut-out, no ceiling grid required. The “low glare” version uses a prismatic diffuser engineered to a UGR<19 rating, which softens the light so the fitting doesn’t look harsh to look up at. It’s designed for offices, classrooms, corridors and other interior commercial spaces where visual comfort matters and standard grid-mounted fittings aren’t an option.
What does UGR<19 mean, and where does it matter?
UGR stands for Unified Glare Rating – a measure of how much glare a light fitting creates. UGR<19 is the threshold required for office workstations under BS EN 12464-1, the European standard for indoor workplace lighting. Our low glare surface linears meet that requirement, so they’re suited to offices, meeting rooms, schools, healthcare and any environment where visual comfort is part of the brief.
Where are LED low glare surface linears typically used?
Anywhere with a flat, fixed ceiling where you want good quality, glare-controlled interior lighting. Common applications include offices, meeting rooms, classrooms, corridors, retail spaces, healthcare and general commercial fit-outs – anywhere UGR<19 compliance matters and there’s no suspended ceiling grid to drop a panel into.
For grid-ceiling installs that need the same office spec, our Low Glare Downlights or Backlit Panels cover the same brief in a grid-mount format.
What does "selectable wattage" mean?
It means one fitting covers two power outputs – 40W or 50W – and you choose the output at the point of install to suit the job. At 40W it delivers 5,300 lumens; at 50W it delivers 6,100lm. Rather than stocking two separate products, you stock one and set the wattage on site.
Can I change the colour temperature of the surface linear?
Yes – the fitting is tri-colour selectable at install: 3000K warm white, 4000K neutral white or 5700K cool white. One product covers warm, neutral and cool jobs, so you don’t need to decide before you’re on site.
Are surface linears available with sensors, emergency and DALI?
Yes. Alongside the standard version, the low glare surface linears are available with a microwave sensor, as a dimmable version, as DALI addressable, and as an emergency version. To order a particular version, quote the part number you need – or just tell us roughly what you’re after and we’ll work it out with you.
Can I use these with my existing DALI system?
Yes. When you need DALI, we build it straight into the fitting, so the surface linear integrates seamlessly with the DALI system you’ve already got – no need to rip it out and replace your existing controls, no forking out for a full DALI replacement. You keep the infrastructure and just upgrade the light.
For smaller installs without an existing DALI network, pair the fitting with our DALI Dimmer Switch – a compact wall-mounted dimmer that drives up to 26 DALI devices directly.
Can the surface linear be suspended instead of ceiling-mounted?
Yes – an optional Suspension Kit is available to hang the linear from a ceiling or void where surface mounting isn’t practical, or where the design calls for a pendant look. Give us a call and we’ll confirm the kit that matches your install.
Do I need an electrician to install a surface linear?
Yes. The fitting wires into the mains supply, so installation should always be carried out by a qualified electrician in line with current wiring regulations.
What's the warranty on the surface linear?
LED low glare surface linears come with a 5 year warranty for reliable, consistent performance across the life of the install.
Can I get a custom low glare surface linear?
Yes. If the standard sizes or specifications don’t match your job, we build linears to order – non-standard lengths, outputs, colour temperatures and configurations. Tell us what you need and we’ll quote it.





