/

/

LED Magnetic Linears

LED Magnetic Linears

A quick, no-fuss retrofit solution designed to upgrade existing fittings without replacing the housing. Each tray secures magnetically – no screws or drilling required – for fast installation and reduced labour time.

Available in 7 different lengths (6″ to 6ft), they’re compatible with existing DALI systems, so there’s no need for costly DALI replacements.

Designed for flexibility and reliability, the Magnetic Linears provide a straightforward way to modernise older fittings while maintaining existing housings – saving time, money, and waste on every install.

Key Features

910-11358lm

output

4000K

colour temperature

7 sizes

available

Built for the jobs you're already doing

Classrooms, corridors, office refurbs, retail back-of-house. The magnetic linear drops into pretty much any existing fitting you’ll find on site.

Schools & Universities

Corridors & Stairwells

Commercial Applications

Part Number Size Wattage Lumens Colour Temperature Data Sheet

LR90060

6″
6W
910lm
4000K

LR90061

1ft
9-16W
1623-2840lm
4000K

LR90062/S

2ft (Single)
9-16W
1623-2840lm
4000K

LR90062

2ft (Twin)
19-33W
3245-5679lm
4000K

LR90065/S

3ft (Single)
19-33W
3245-5679lm
4000K

LR90065

3ft (Twin)
33-49W
5679-8519lm
4000K

LR90063/S

4ft (Single)
33-49W
5679-8519lm
4000K

LR90063

4ft (Twin)
51-65W
8924-11358lm
4000K

LR90064/S

5ft (Single)
51-65W
8924-11358lm
4000K

LR90064

5ft (Single)
51-65W
8924-11358lm
4000K

LR90066/S

6ft (Single)
51-65W
8924-11358lm
4000K

LR90066

6ft (Twin)
51-65W
8924-11358lm
4000K

Pop the old gear tray out, snap the new one in place

Magnets make the retrofit linear a dream to install – no drilling, clips or extra fixings needed.

Faster installs and less mess means contractors save time on-site – especially when swapping out dozens of fittings in one day.

Integrates with existing DALI systems

No need to purchase a costly DALI replacement. We’ll build DALI into the gear tray so it seamlessly integrates with your existing system.

What we get asked

It’s a complete LED upgrade unit – drivers, LEDs and diffuser on a single tray – that replaces the internals of an existing light fitting. Instead of removing the whole luminaire, you take out the old gear tray and the new LED tray secures in place magnetically. The existing housing stays on the ceiling.

Yes – that’s exactly what the magnetic linear is built for. It fits into the existing housing, so there’s no need to replace the whole luminaire. The old gear tray comes out, the LED magnetic tray goes in.

A few minutes per fitting. Because the tray holds in place magnetically, there’s no drilling or fixing – pop the old tray out, wire the new one in, move on. On a job where you’re swapping dozens of fittings in a day, that time saving adds up fast.

Yes. The tray wires into the mains supply, so installation should always be carried out by a qualified electrician in line with current wiring regulations.

They’re available in a range of lengths to suit standard fitting sizes, starting from 6 inches. See the spec table on the product page for the full range, wattages and lumen outputs.

It depends on the space and the mounting height, but as a guide: a 4ft magnetic linear (28W) delivers 5,000 lumens – enough to replace a traditional twin fluorescent fitting while drawing far less power. If you’re not sure which output suits the job, send us the details and we’ll point you to the right one.

Yes. As well as the standard version, the magnetic linears are available as dimmable and DALI addressable, plus an emergency version.

Yes. When you need DALI, we build it straight into the gear tray, so the linear integrates seamlessly with the DALI system you’ve already got. No ripping out and replacing your existing controls, no forking out for a full DALI replacement – you keep the infrastructure and just upgrade the light.

The standard range runs at 4000K – a neutral white that suits offices, schools, healthcare and retail. If a job calls for a different colour temperature, we can build to order.

LED magnetic linears come with a 5 year warranty. They’re built with Tridonic drivers and LEDs – the same trusted components specified across professional installs – for reliable, consistent performance.

Yes. If the standard range doesn’t match your fitting or your spec, we build LED gear trays to order – non-standard lengths, outputs, colour temperatures and optics. Send us the details of the existing fitting and what you need, and we’ll quote it. Lead times on custom builds can vary, so call us to confirm.