/

/

LED Top Hat Square Gear Trays

LED Top Hat Square Gear Trays

Square bulkheads can be a pain to source. The choice is narrower than round, lead times run longer, and matching an older housing isn’t always possible off the shelf.

We don’t do a square bulkhead. We do this.

A square-format LED gear tray with Tridonic LEDs and a Tridonic driver on a single backplate. It drops straight into the existing square housing. Keep the fitting. Upgrade the internals.

Adjustable 10-17W, up to 160lm/W, 4000K, 100,000 hour lifespan. All components mount behind the LED plate, so the diffuser lights evenly corner to corner.

Key Features

1755-2732lm

adjustable output

4000K

colour temperature

Emergency and Microwave

options available
Part Number Description Wattage Lumens Colour Temperature Data Sheet

LR70172

Standard
10-17W
1755-2732lm
4000K

LR70172/EM

Emergency/Self Test
10-17W
1755-2732lm
4000K

LR70172/MW

Microwave Sensor
10-17W
1755-2732lm
4000K

LR70172/MWEM

Microwave Sensor Emergency/Self Test
10-17W
1755-2732lm
4000K

Uniform light distribution

Driver, emergency pack and sensor components all mount on the back of the tray. The front is just the LEDs, so the diffuser gets even light across it’s whole face.

Adjustable 10-17W via Tridonic driver

Dial in the exact output the space needs on site – one fitting covers everything from a dim stairwell to a bright corridor. 

What we get asked

A top hat square gear tray is a complete LED retrofit unit — Tridonic LEDs, driver and all electrical components built onto a single square backplate — designed to replace the internals of an existing square light fitting. Instead of swapping out the whole luminaire, the gear tray drops into the existing housing: the housing stays on the ceiling, you get an upgraded LED fitting underneath.

You can. Square bulkheads are still out there — they’re just a smaller slice of the market than round ones, so the choice is narrower and lead times are often longer, especially for a like-for-like match to an older housing. If a project is on a short programme, waiting on stock to arrive isn’t always an option.

That’s the gap this gear tray fills. The existing square housing stays on the wall or ceiling; the gear tray drops into it with upgraded Tridonic LEDs, driver, and (optionally) emergency and sensor built in. No lead time on a replacement fitting, no stripping out and re-chasing cables, no leaving a dated square housing in place while you wait for stock.

And a round gear tray in a square housing isn’t a fix — the LED only lights the central circular area, so the corners of the diffuser go dark, which looks poor and can discolour the diffuser over time. The Top Hat Square Gear Tray sits properly in the housing so all four corners of the diffuser get even light.

Both are LED retrofit trays. Both drop into existing housings instead of replacing the whole luminaire. But they’re built for different fitting types and at different spec tiers:

  • LED Retrofit Gear Trays — round, with multiple mounting points to fit a range of round bulkhead housings. Selectable 12W/14W/16W/18W, with tri-colour (3000K/4000K/5500K) or fixed 4000K options. The go-to retrofit for round bulkheads in utility spaces, corridors and residential common areas.

  • Top Hat Square Gear Tray (this page) — square (226 × 230mm), for square light fittings. Adjustable 10-17W (continuous, not stepped), 4000K only. Tridonic LEDs and driver throughout. Longer lifespan (100,000 hours LM80) and higher efficacy (up to 160lm/W).

The output is continuously adjustable from 10W to 17W (1,755 to 2,732lm) via the Tridonic driver. Set the exact output the space needs on install — one tray covers everything from a dim stairwell to a bright corridor.

That’s finer control than stepped selection. Instead of picking from fixed wattages (12W / 14W / 16W / 18W, like our standard retrofit trays), you dial in exactly the output the install calls for.

The Emergency and Microwave Sensor/Emergency variants include a Streamer emergency pack with built-in self-test. The pack runs scheduled function tests and full-duration discharge tests automatically, logging the results — so the responsible person doesn’t need to flick the mains every month to manually test the emergency lighting.

Runtime is 3 hours on a fully charged battery, meeting BS 5266 for non-maintained emergency lighting. Battery is LiFePO4 (lithium iron phosphate), 3.2V 2,000mAh, with a 24-hour full charge time.

The Microwave and Microwave/Emergency variants have a built-in sensor that detects movement across a 2-10m range and switches the light on or off based on occupancy. Hold time is adjustable from 5 seconds to 10 minutes — short for washroom corridors, longer for school corridors that are in near-continuous use.

Yes. The gear tray wires into mains, so installation should always be carried out by a qualified electrician in line with current wiring regulations. EM variants also need the install documented for BS 5266 compliance.

The Top Hat Square Gear Tray carries a 5-year warranty on the product.

The emergency pack on the Emergency and Microwave Sensor/Emergency variants carries a shorter 1-year warranty on the battery — the electronics follow the full 5-year cover, but the battery itself is treated as a wear item on its own cycle. If a battery fails within 12 months we’ll replace it.